Champion 30L rebuilding continues....

Above pics: Horizontal fin, vertical fin, elevator and rudder were covered. The covering and ironing process I skipped to shorten the post.

The vertical fin was clamped and epoxied to the horizontal fin with a right angled aluminium block to make sure a true 90 degrees angle.

A metal sheet put between the clamp and the vertical fin to protect the balsa and covering.

After more than an hour, the epoxy set....

Coming up....

Fixing to airplane fuselage.

My next project.... Thunder Tiger Champion 30L pattern RC airplane

Some parts and accessories

It is the time to rebuild this Pattern Champion 30L since grounded for years.

Constructed from balsa, plywood, plastic belly and clear canopy with meter panel.This tail dragger Pattern airplane was an aerobatic with fully symmetrical wing.

Missing parts: Rudder, elevator and tail wheel assembly.
All other accessories were available.

Also there was my other 60 size Pattern airplane complete with ASP .61 engine kept in my storeroom. The wing was broken into two.... Need to construct the wing back. First of all, I will do the Champion 30L first as it only has not so much works to complete. But my 60 size Pattern is a long way to go.....

Stay tuned....